This Viscometer bath is used to maintain the correct constant temperature for estimating Kinematic Viscosity of Oil and Petroleum Products in this type of bath various viscometers may be fixed as an internal part of the bath.The bath is rectangular shape.Inside tank is made of Stainless Steel Sheet. Two sides toughed glass window provided for full visibility of objects inside the bath. The bath is controlled by an electronic relay and contact Thermometer Or Digital Temperature controller cum indicator.Temperature range 5⁰C above room temperature to 100⁰C. Accuracy plus minus 0.1⁰C. Stirring is done by a FHP electric motor stirrer.Heating is done by means of tubuler type heater fitted on top of the bath.It is supplied with viscometer tube holders and stainless steel cover. Different size & accomodation are available as under without Viscometer tube.

Optional Accessories:

IMC-731	Kinematic Viscometer Bath chamber size 12" X 9" X 12" deep to accomodate 4 Viscometers, temperature controlled by Contact thermometer & Electronic relay.
IMC-731A	Same as above fitted with 2 outer glass panels on the exterior housing(Double glass).
IMC-731B	Same as above with Digital temperature controller cum indicator (i.e. IMC-731).
IMC-732	Kinematic Viscometer Bath chamber size 12" X 12" X 12" deep to accomodate 6 Viscometers, temperature controlled by Contact thermometer & Electronic relay.
IMC-732A	Same as above with 2 outer glass panels on the exterior housing (Double glass).
IMC-732B	Same as above with Digital temperature controller cum indicator(i.e. IMC-732).
IMC-733	Kinematic Viscometer Bath chamber size 18"X12"X12" deep to accomodate 6 Viscometers, temperature controlled by Contact thermometer & Electronic relay.
IMC-733A	Same as above with 2 outer glass panels on the exterior housing (Double glass).
IMC-733B	Same as above with Digital temperature controller cum indicator(i.e. IMC-733).

Note :
1. Please mention correct size and viscosity range of viscometer tubes with indent/order.
2. 'U' Tube with constant test certificate at an extra cost for each tube.
3. A circulating pump instead of stirrer can be provided on the extra cost.
4. Powder coating instead of enamal paint can be also be provided at extra cost.